CD-RW 5232IB
3
INSTALLATION
Host Interface Connections
Most current motherboards have two IDE ports (primary and secondary)
which can connect two IDE cables. Two IDE cables allow you to connect
up to four devices, but it is recommended that you separate IDE ports for
your hard disk and your CD-ReWritable drive. This will ensure that your
hard disk’s performance and speed won’t be affected by having the CD-
RW drive on the same cable.
Cable Select
Slave
Master
If you connect only one device on the cable, you can set the jumper as
“MASTER” or “SLAVE”.
If you connect two devices (e.g. CD-ROM & CD-RW) on the same cable,
set different jumpers for each device (CD-ROM as “MASTER”, CD-RW as
“SLAVE” and vice versa.) The same rule applies to the connection of
having your hard disk and another device on the same cable.
Master
Cable Select
Slave
Jumper
Summary of Contents for BCE5232IB
Page 1: ...Dual Digital Storage Drive CD RW 5232IB User s Manual...
Page 11: ...CD RW 5232IB 7...
Page 21: ......