BT Wi-Fi Extender 610 User Manual Download Page 6

General information

For information on safety instructions,  
technical information or setting  
up the extender, please see the 
Frequently Asked Questions at  
bt.com/wifiextender610

Guarantee

Your Wi-Fi Extender 610 is guaranteed for a period of 

3 years from the date of purchase. Subject to the terms 

listed below, the guarantee will provide for the repair of, 

or at BT’s or its agent’s discretion, the option to replace 

the Wi-Fi Extender 610 or any component thereof which 

is identified as faulty or below standard, or as a result of 

inferior workmanship or materials. Products over 28 days 

old from the date  

of purchase may be replaced with a refurbished or  

repaired product.
The conditions of this guarantee are:
•  the guarantee shall only apply to defects that  

occur within the 3 year guarantee period

•  proof of purchase is required
•  the equipment is returned to BT or its agent 

as instructed.

This guarantee does not cover any faults or defects 

caused by accidents, misuse, fair wear and tear, neglect, 

tampering with the equipment, or any attempt at 

adjustment or repair other than through approved agents.
This guarantee does not affect your statutory rights.
To find out what to do if your extender is in or 

outside of the 3 year guarantee, please see the FAQ 

at bt.com/wifiextender610

How to recycle your equipment

The symbol shown here and on the product  
means that the product is classed as electrical  
or electronic equipment, so DO NOT put it in your  
normal rubbish bin. 
It’s all part of the Waste Electrical and Electronic Equipment 
(WEEE) Directive to recycle products in the best way – to be 
kinder to the planet, get rid of dangerous things more safely 
and bury less rubbish in the ground.
You should contact your retailer or supplier for advice 
on how to dispose of this product in an environmentally 
friendly way.

R&TTE Directive & Declaration of Conformity

This equipment complies with the essential requirements 

for the Radio Equipment and Telecommunications Terminal 

Equipment Directive (1999/5/EC).
For a copy of the Declaration of Conformity  

please refer to bt.com/wifiextender610

This product uses open source codes available  

from bt.com/help/gplcode

Power consumption

In operation

5.8 Watts

Network standby 

2.7 Watts  

Off mode

0.1 Watts

Elapsed time before going 

into standby mode

5 Minutes

Offices worldwide

The services described in this publication are subject to availability and may be modified from time to time.  

Services and equipment are supplied subject to British Telecommunications plc’s respective standard conditions of contract.  

Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2015. Registered Office: 81 Newgate Street, London EC1A 7AJ.  

Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 1 / ADP05-15

Extender default settings

Find out more

•  If you need more help, go to bt.com/wifiextender610 where you can view 

Frequently Asked Questions.

  If you cannot find the answer to your problem in the Frequently  

Asked Questions, then please call our free Helpline on 0808 100 6116*. 
Our dedicated advisors are more likely to be able to help you than the 
retailer where you made your purchase.

Box contents

WPS

Ethernet
Power
Too close

Good range

Too far

Dual-Band  

Wi-Fi Extender 610

Summary of Contents for Wi-Fi Extender 610







Reviews: