BT Synergy 5100, User Manual

Page: 28 / 60

28
If you experience any problems, please call the Helpline on
0800 145 6789*
or email
bt.helpdesk@sgweurope.com
Base settings
If you have subscribed to your network’s Caller
Display service, your BT Synergy 5100 does not
ring until the caller information has been received
and displayed.
However, if you want your handset to ring
without waiting for the caller information to
be displayed, set First Ring to On. Please note
that this will mean the first ring you hear will
be the default ringtone. This will change to any
ringtone you have set once the caller information
is displayed.
First ring
1. Press
menU
, scroll to
settings
and press
select
.
2. Scroll to
set Base
and press
select
.
3. Scroll to
first ring
and press
select
.
4. Press
or
to
on
or
off
then press
select
to confirm.
5. Press
Back
to return to the previous menu level.
System PIN
1. Press
menU
, scroll to
settings
and press
select
.
2. Scroll to
set Base
and press
select
.
3. Scroll to
sYstem Pin
and press
select
.
4. Enter the old PIN (original setting 0000) and press
ok
.
5. Enter the new PIN and press
ok
.
6. Re-enter the new PIN and press
ok
.
7. Press
Back
to return to the previous menu level.
Restore default settings
1. Press
menU
, scroll to
settings
and press
select
.
2. Scroll to
set Base
and press
select
.
3. Scroll to
master reset
and press
select
.
4. Select
Yes
to confirm or
no
to cancel.
5. Enter the system PIN (original setting 0000) then press
ok
. The display will
show
reset comPlete
then return to standby.
The System PIN is used when changing certain
settings and registration / de-registration. The
default setting is 0000. You can change this to
your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as
****
.
You can restore your BT Synergy 5100 to its
default (original) settings.
It will not affect the phonebook, calls list or
user’s data.
All handsets registered to the base wil
be retained.
All text, handset and base settings will be reset.