BT SYNERGY 4500 User Manual Download Page 41

Page: 41 / 100

If you experience any problems, please call the Helpline on

0870 605 8047

Symbol Definition

(flashing) Message

recording

(memo, outgoing
message or
incoming
message).

Setting or reading
answer delay.

Counting down.

Setting up the answering machine

Switch the answering machine ON/OFF using
the base

1. Press

and release

to switch ON or OFF.

If you hear,

“Answer on, your answer and record outgoing

message is....”,

the answering machine is switched on and

is ready to answer incoming calls and record any
messages. The display on the base shows the number of
messages stored in the memory.

If you hear

“Answer off”

the answering machine is

switched off. The display on the base will flash between
a dash (

) and the number of messages saved in the

memory.

Switch the answering machine ON/OFF using
the handset

1. Press

until the display shows

Answer

. The

current status (

Off

) is highlighted.

2. If you want to change the status, press

either

the

OFF

option button. Your chosen setting will be

announced and then the display will return to standby.

Menu

Answering machine

Synergy 4500 – Issue 3 – Edition 1 – 21.08.06 – 7771

If you have selected Answer Only
mode the caller will hear an
advisory announcement only, and
will not be able to leave a
message,

see page 43-44.

The only option available is to
toggle the setting, i.e. if the
machine is set to Answer on you
can only change to Answer off and
this change of setting only will be
announced.

Summary of Contents for SYNERGY 4500





































































































Search results

Summary of Contents for SYNERGY 4500

Reviews:

Related manuals for SYNERGY 4500

Brands by name

Popular brands

BT SYNERGY 4500, User Manual

Search results

Summary of Contents for SYNERGY 4500

Reviews:

Related manuals for SYNERGY 4500

Brands by name

Popular brands