BT Studio 4500 Plus User Manual Download

Page: 87 / 100

Synergy 4500 – Edition 3 – 18.04.06 – 7367

If you experience any problems, please call the Helpline on

0870 605 8047

or email

[email protected]

No display

•

The batteries may be flat, dead or incorrectly inserted.

•

Recharge or replace the batteries.

icon flashes

•

Is the handset registered correctly to the base, see page 81.

•

Check that the mains power is correctly connected.

•

Check that the handset is within range of the base.

icon flashes

•

The batteries are low, place the handset on the base/charger to recharge.

icon not scrolling

•

Try cleaning the charging contacts.

•

Check that the mains power is correctly connected.

You hear the busy tone when you press

•

Make sure the handset is in range of the base.

•

Another handset registered to your BT Synergy 4500 base may be on the line.

Answering machine does not record any messages

•

The memory may be full. Play and delete old messages,

see page 48-51

Answering machine messages have the wrong date and time

•

Have you set the date and time?

See page 10

Help

Summary of Contents for Studio 4500 Plus





































































































Search results

Summary of Contents for Studio 4500 Plus

Reviews:

Related manuals for Studio 4500 Plus

Brands by name

Popular brands

BT Studio 4500 Plus, User Manual

Search results

Summary of Contents for Studio 4500 Plus

Reviews:

Related manuals for Studio 4500 Plus

Brands by name

Popular brands