On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992
35
A total REN of 4 is allowed per telephone line.
(For example: if the BT On-Air Executive is used
in conjunction with three extension telephones,
each with a REN of 1, then the total REN = 4)
Only use approved power supply item code
872101.
Only use approved batteries item code 872102.
RTTE
This apparatus was designed in compliance with
European Council decision Number 98/482/EC
relative to pan-European connection in view to
its connection on the Public Switched Telephone
Network (PSTN). It is in conformity with
Standards TBR21, TBR38(*)ETSI 201 121.
(*) Terminals integrating an analogue handset function.
If problems arise, your supplier should be
contacted first.
The EC marking attests product conformity with
the essential requirements in compliance with
Directives 73/23/EC for User Safety, 89/336/EC
for Electromagnetic perturbations and 98/13/EC
for Telecommunication network access.
The manufacturer declares that the products
have been manufactured in conformity with
Annex III of RTTE Directive 99/05/EC.
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on
0845 601 2476
.
Generally this telephone may be connected to
switchboards which support tone signalling and
timed break recall.
In the event of any
difficulties please consult your switchboard
service provider. Please note this product does
not support
earth recall.
Switchboard compatibility
To activate Recall
This is of use when connected to
switchboards or using BT Select
Services. It is only available when a call
is in progress.
When you need to use recall during
a call:-
Press the
button.
Press the
button when
R
appears
above on the display.
Recall
When you connect your telephone to a
switchboard, you can set the switchboard’s
external line access code so that when you make
an external call using the handset directory,
redial list or preparatory dialling, the code is
automatically dialled before the number.
Switchboard external line
access code
To set the external line access code
Press the
UP
or
DOWN
button to
select
Base
.
Press
OK
.
Press the
UP
or
DOWN
button to
select
Base settings
.
Press
OK
.
Press the
UP
or
DOWN
button to
select
Phone line
.
Press
OK
.
C
OK
C
OK
C
OK
▲
▼
▲
▼
▲
▼
All manuals and user guides at all-guides.com
all-guides.com
