BT In Touch 2000 ~ Edition 03 ~ 01.03.05 ~ 6692
5
Setting up your phone
Please follow all the steps in the order shown
1
Plan where you will put your
BT In Touch 2000 Phone
The phone should be within 2 metres of a phone
socket.
2
Install the batteries
You must fit the batteries supplied before you
attach the base stand for either raised or wall-
mounting positions.
3
Connect the telephone line cord
Connect the line cord to your phone socket.
Open the battery cover on the underside of your BT
In Touch 2000. Insert the 6 x AA Alkaline batteries.
Please note
The BT In Touch phone has 3 voice prompts to
indicate that mains power or the telephone line has
been disconnected or that the battery power is low.
These are: “Telephone line disconnected”, “No mains
power” or “Please change batteries”.
You may hear these voice prompts when first setting
up your phone. This is perfectly normal and shows
the phone’s warning alerts are working.
Warning
Your BT In Touch 2000 is only designed to operate
in a normal domestic environment.
Warning
Before installing (or replacing) the batteries, the
phone must be disconnected from the phone line
and the mains power.
