BT In Touch 2000 ~ Edition 03 ~ 01.03.05 ~ 6692
27
BT In Touch Pendant
Small, lightweight and waterproof, the BT In Touch
Pendant acts as a portable emergency button for the
BT In Touch 2000. When pressed in an emergency,
the BT In Touch Pendant contacts the BT In Touch
2000 which starts dialling the stored emergency
numbers.
In a non-emergency, the BT In Touch Pendant button
can be pressed to answer and end an incoming call,
enabling the User to hold a ‘handsfree’ conversation
via the loudspeaker on the phone.
The BT In Touch Pendant has a battery life of about
5 years (based on 2 presses a day) and a range of
up to 50 metres from the BT In Touch 2000.
It has 2 interchangeable, detachable mountings
allowing it to be worn around the neck or on a
wrist strap.
You can have up to 2 BT In Touch Pendants working
with one BT In Touch 2000.
BT In Touch Pendant
emergency button
When pressed, this
button starts the
emergency sequence.
Reverse side
Returning your BT In Touch 2000 to
its factory settings
Follow the procedure below to restore the original
settings.
To return your BT In Touch 2000 to its
factory settings
Lift the Quickdial memory label to reveal
the
Setup
button.
Press the
Setup
button.
The display shows:
Press
4
then
2
. The display shows the
digits and you hear a beep after each digit
is entered.
The display changes to:
Press the
Setup
button. You now hear a
double beep as confirmation.
Setup
Announce
SETUP
RESET?
SET UP
Setup
AB
C
GH
I
Setup
Warning
This will also delete all stored memories, even
Quickdial memories which have been given
emergency status.
