BT Hub Phone 2.1, User Manual

Page: 32 / 80

28
Making and receiving calls
Making calls with Broadband Talk
Once you’ve activated your service, all calls made with your
Hub Phone will use BT Broadband Talk.
When you make a call, You’ll notice a high pitched dial tone.
This lets you know you’re about to make a BT Broadband
Talk call. Like a mobile phone, you’ll need to dial any phone
number in full (i.e. including the area code). This applies to
local numbers, too.
> Learn about BT Broadband Talk – see page 6
> Help – see page 59
> More information –
www.bt.com/broadbandtalk/support
www.bt.com/setup/talk
To switch the handset power on/off
1 Press and hold .
2
Press to switch the handset back on again.
To make an external call
1
Press , wait for the dial tone then dial the full
telephone number.
Press Up or Down during the call to adjust the volume
of the caller’s voice.
To enter the number before dialling (pre-dial)
1
From standby, enter the full phone number you want to
dial (up to 24 digits). If you make a mistake, press Clear to
delete incorrect digits.
2
Press to dial.