BT FREESTYLE 120 PLUS, User Manual

Page: 13 / 34

To use the Channel seeker
Your Freestyle 120 Plus automatically scans
all the available radio channels for quality of
reception, and selects the best one to use.
If you experience interference during your
call, press the
CHANNEL SEEKER
button to
select a different channel.
To adjust the handset ringer
The ring mode switch on the side of the
handset can be set to either:
•
ON
(handset rings) or
•
OFF
(handset does not ring).
To set the ringer switch
(Located at the back of the base unit)
You can set the ringer to
HI
,
LO
or
OFF
.
If the base unit ringer is switched
OFF
, the
handset will still ring providing the handset
ringer is not switched to
OFF
.
To set the tel mode switch
(Located at the back of the base unit)
The tel mode switch selects tone or pulse
dialling and earth or time break recall:
•
T-TB
– Your Freestyle 120 Plus is preset to
this position. Most modern exchanges use
tone dialling and time break recall for faster
dialling, and for services such as BT Select
Services and telephone banking.
•
P-E
– If you dial a number when your
Freestyle 120 Plus is set to
T-TB
or
T-E
and
you continue to hear the dialling tone, you
may be connected to an older pulse
dialling exchange. Set the switch to
P-E
(pulse dialling).
•
T-E
– This setting is for use if you are
connected to a tone dialling PBX (private
branch exchange) that uses earth recall.
Using your Freestyle 120 Plus
11
CHANNEL
SEEKER
RING MODE
OFF ON
RINGER
HI LO OFF
An Inductive Coupler has been built into the
handset to improve sound quality for people using
hearing aids. Switch your hearing aid to T and
adjust the position of the handset until you get the
best reception.
T-TB T-E P-E
TEL MODE