If you enter the incorrect PIN code,
you will hear “Incorrect security code”.
You have two chances to enter the
correct remote access security code
before your BT Freelance XD7500
hangs up.
Time saver
If you have set the answer delay to
Time Saver, your answering machine
will answer after 2 rings
if you have new messages. If you do
not have new messages it will answer
after 6 rings. This enables you to hang
up if you hear more than 2 rings
before you are connected, saving you
the cost of a call. See Answer delay,
page 49.
If you do not press any button for
4 seconds, your BT Freelance XD7500
hangs up.
Remote access
You can operate your answering machine remotely from any
Touchtone™ phone by calling your BT Freelance XD7500 and
entering a 4-digit security code.
Change security PIN code
1. Press the
Left soft key
, the display shows
ANS MACHINE
,
press
OK
.
2. Press
or
until
ANS SETTINGS
is displayed and press
OK
to select.
3. Press
or
to display
CHANGE PIN
and press
OK
.
4.
PIN?
is displayed, enter the current PIN and press
OK
.
5.
NEW PIN?
is displayed, enter your new PIN and press
OK
.
Re-enter when the display shows
CONFIRM?
and press
OK
.
6. Press and hold
to return to standby.
Switch answering machine on
If you forget to switch on your answering machine, you can do
it from another phone.
1. Dial your phone number and after 20 rings your BT Freelance
XD7500 will answer. When the message starts press
and you
will hear, “Please enter your security code”. Enter your 4-digit
code.
50
Answering machine
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [email protected]
