BT FREELANCE XD 510 Page 30 User Manual Download

Page: 30 / 71

BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970

4. Enter your 4-digit PIN (original setting 0000) and

press

NEW PIN

is displayed.

5. Enter your new 4-digit PIN and press

RETYPE

is displayed.

6. Re-enter your new 4-digit PIN and press

You will hear a confirmation tone.

7. Press

and hold

to return to standby.

Handset and base reset

1. Press

to enter the menu.

2. Press

to scroll to

SETUP

and press

3. Use

to scroll to

DEFAULT

and press

PIN?

is displayed.

4. Enter the base PIN (original setting 0000) and

press

You will hear a confirmation tone at the base and
handset.

The handset display will flash

BASE 1

then

HANDSET 1

Your BT Freelance XD 510 is now reset to the factory
settings.

Secrecy

Del

Base settings

Summary of Contents for FREELANCE XD 510








































































Search results

Summary of Contents for FREELANCE XD 510

Reviews:

Related manuals for FREELANCE XD 510

Brands by name

Popular brands

BT FREELANCE XD 510, User Manual

Search results

Summary of Contents for FREELANCE XD 510

Reviews:

Related manuals for FREELANCE XD 510

Brands by name

Popular brands