42
BT Freelance XC1100 UG – Issue 2 – Edition 01 – 25.02.08 – 8665
If you experience any problems, please call the Helpline on
0870 242 6652*
Technical information
How many telephones can I have?
All items of telephone equipment have a Ringer
Equivalence Number (REN), which is used to calculate
the number of items which may be connected to any
one telephone line. Your BT Freelance XC1100 has a
REN of 1. A total REN of 4 is allowed. If the total REN
of 4 is exceeded, the telephones may not ring. With
different telephone types there is no guarantee of
ringing, even when the REN is less than 4.
Any additional handsets and chargers that you register
have a REN of 0.
Only use approved base mains power supply, item
code: 041293.
If you have purchased a BT Freelance XC1100 multiple
pack, the item code for the charger mains power
supply is 041294.
Only use approved batteries.
These products are available from the BT Freelance
XC1100 Helpline on 0870 242 6652*.
Declaration of Conformance
Hereby, CCT Marketing Ltd declares that this BT
Freelance XC1100 is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
R&TTE
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.
Connecting to a switchboard
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards, which support tone dialling
and timed break recall. If in doubt please consult your
service provider.
Inserting a pause
With some switchboards, after dialling the access code
you may have to wait for a moment while the
switchboard picks up an outside line so you will need
to enter a pause in the dialling sequence.
Press and hold
to insert a pause (P) before
entering the telephone number.
You may also need to enter a pause when storing
international numbers or charge card numbers.
Recall (R)
You may need to use the recall function if you are
connected to a switchboard/PBX (Private Branch
Exchange), contact your PBX supplier for further
information. The recall function is set to timed break
recall and is also used for BT Calling Feature.
General information
Summary of Contents for FREELANCE XC 1100
Page 1: ...BT Freelance XC1100 User Guide...
Page 43: ......