To insert a pause:
1. Begin storing a number and press
where a
pause is needed. P is shown in the display.
Recall
The
button is used when connected to certain
switchboards, e.g. to transfer calls, and for some
BT Calling Features or those services available via
your network provider.
Dialling mode
Your BT Freelance XA 5000 is set to tone dialling.
If required you can switch it to pulse dialling.
1. Press ,
scroll to
SETUP
and press
.
2. Scroll to
DIAL MODE
and press
.
3. Press or to
select
either
TONE
or
PULSE
then press
.
4. Press
twice
to return to the idle screen.
Temporary change to dialling mode
If you have set your BT Freelance XA 5000 to
Pulse dialling, you can temporarily switch to Tone
dialling during a call.
1. Press
, then press
, then dial the number as
normal.
Your BT Freelance XA 5000 will switch to Tone
dialling only for the duration of this call.
Alternatively, you can store a phonebook number
so that it will temporarily switch to Tone dialling
each time it is dialled.
2. Press and hold
before you store the number in
the phonebook. d is displayed.
R&TTE Directive
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment
Directive (1999/5/EC).
In demonstration with the Essential Requirement
for efficient use of the radio spectrum, the
product complies with EN301 406.
Hereby, Suncorp Technologies, declares that this
BT Freelance XA 5000 is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC.
The Declaration of Conformance for the BT
Freelance XA 5000 is published on the website:
http://www.suncorptech.com/bt
55
General information
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
If you experience any problems, please call the Helpline on
0870 605 8047
