Reset the handset and base
1. Press ,
scroll to
SETUP
and press
.
2. Scroll to
DEFAULT
and press
.
4. Display shows
PIN?
Enter your 4 digit PIN then press
.
Display shows
CONFIRM?
Press
again
. Your BT
Freelance XA 5000 will reset itself to the default settings
and you will hear a confirmation beep.
Reset if you have forgotten your PIN code
1. Press
and hold
to switch the handset off and remove
the handset batteries,
see page 14.
2. Press
and hold
as you replace the batteries.
Wait until the display shows
DEFAULT
.
3. Press
to confirm. After a few seconds the base will
beep and the handset and base will reset.
32
Base settings
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
If you experience any problems, please call the Helpline on
0870 605 8047
WARNING
If you reset the handset and base,
you will lose any names or
numbers stored in the phonebook,
redial list and calls list.
Any other settings will also be set
back to the factory default.
