![background image](http://html1.mh-extra.com/html/bt/ergomover-620-ac-tt/ergomover-620-ac-tt_operators-manual_2824717005.webp)
Safety regulations
© BT Industries AB 212908-040
4
General safety regulations
Always carry out daily service before the truck is used, see
chapter
Daily service and function checks. The working order of
all safety equipment, guards and safety switches should be
checked before you use the truck. Such safety equipment must
not be disengaged or removed.
The battery must be secured in its intended compartment. The
battery shall have a weight that corresponds with the information
stated on the truck’s identification plate.
The truck must not be used if it is damaged or has faults that
affect safety or its safe use. The truck may not be used if it has
been repaired, modified or adjusted unless it has been checked
and approved by personnel authorised by BT.
Operating the truck
The truck is designed and produced to be your tool when trans-
porting, collecting and leaving loads.
If the truck is to be used in cold storage rooms the truck must be
especially built for this type of use.
It is not permitted to use the truck for purposes that it has not
been designed and produced for, e.g. the following applications:
-
In areas where the atmosphere contains dust or gases
that can cause fires or explosions.
-
To tow other trucks.
-
To transport/lift passengers.
Personal protective equipment
•
Always wear safety shoes with steel toe caps when using the
truck.
Fire
In the event of fire, use a powder fire extinguisher for electrical
materials (type ABE, Class I).
Operator’s responsibility
•
The truck shall only be driven with care, good judgement and
in a responsible manner.
•
Only handle loads that are stable and arranged in a safe
manner.