Battery
© BT Industries AB 212908-040
18
•
Change the batteries ans replace the clips. Red is the posi-
tive pole (+) and blue is the negative pole (-). Repeat the pro-
cedure with the next battery.
NOTE! Make sure that the short separate cable runs from the
positive pole (+) on one of the batteries to the negative pole (-)
on the other.
•
When the cassette is slid back into the powerpack, ensure
that the lock has closed. Check that the cassette cannot be
pulled out.
WARNING!
The battery poles must not be short-circuited by any object
made of metal or other conductive material, since the battery
could then explode and cause serious damage and injuries.
Charging table
Placement of the charging table and the
STOP sticker
The U profile is supplied separately from Europfil (it is not sup-
plied together with the truck).
1.
Place the U profile on the floor.
2.
Align the charging table with the U profile.
3.
Drive the truck to the charging table
4.
Align the STOP sticker with the yellow marking on the truck
and attach it.