7
VIDEO
If you happen to be recording on to video when
a call comes in, the callers number will be
displayed on the screen, but will not be recorded
onto the video tape.
IMPORTANT
In some instances, when other equipment is
connected through the Easicom
TV1
, it may be
necessary to ensure that this equipment is
switched to standby when not in use. This will
ensure you can view the caller information and
menus in all circumstances.
If you have any problems viewing caller
information on screen, please refer to the Help
and advice section, page 21.
7
Connect to the power supply
Plug the power adaptor into the power socket on
the wall and switch on.
8
Connect a telephone (optional)
If you wish, you can connect your existing
telephone into the Easicom Set-top box to
ensure that it is conveniently placed for you to
answer the calls you see appear on the screen.
Simply plug the telephone into the socket as
shown.
SETTING UP
Plug this end into the back of the Easicom
T V1
in
the socket marked AUX.
Line
Telephone
Aux Scart
Line
Telephone
Aux Scart
TV Scart
POWER FAILURE
In the event of a power failure to the Easicom
TV1
,
all stored data will be saved in the memory.
Your Easicom
TV1
is now ready
for use
