5
If you experience any problems, please visit www.bt.com/producthelp
Battery low warning
When the batteries are low and in
need of replacing the display will
show the battery low icon
.
Removing the batteries
If you ever need to remove the
batteries, firstly ensure that the
phone is disconnected from the
phone line and then turn the
phone over and remove the battery
compartment cover by pressing in
on the plastic clip and lifting the
cover off. Pull the ribbon to remove
the batteries.
IMPORTANT
Only use the telephone line cord
supplied otherwise your telephone
may not work.
Using your telephone on a
Broadband line?
If this product is to be used on a
broadband line then you must ensure
that it is connected via an ADSL
microfilter. Using this product on
a Broadband line without an ADSL
microfilter may cause problems with
this product and your Broadband
service. BT ADSL microfilters are
available at www.bt.com/shop and
most consumer electronic stores also
stock ADSL filters.
Getting started
Location
You need to place your BT Decor 2200 within 3 metres of a
telephone line socket so that the cable will reach.
Activate the batteries
1
. Activate the batteries by pulling the plastic tab away from the
underside of the phone.
Connect the telephone line
1
. Plug the telephone line cord into the telephone wall socket.
Set the display time and date
See page 17 for instructions.
Your BT Decor 2200 is now ready for use
