background image

If you need some help, call us on 

0800 145 6789*

 or go to 

bt.com/producthelp 

Contacts

29

When you delete all contacts 
they will only be deleted on the 
handset you are using. If you 
have more than one handset 
registered to the base and wish 
to delete all contacts from them 
all, you will need to manually 
follow the delete all contacts 
procedure using each handset.
The delete all contacts feature 
will not delete the special contact 
entries that the handset has pre-
programmed in the memory.

Delete all contacts

1. From the home screen, press 

. The first entry 

will be displayed. Select 

Options

 by pressing 

.

2. Press   until 

Delete

 

all contacts

 is displayed and 

press 

.

3. 

Delete

 

all

 

contacts?

 is displayed, press 

 to 

confirm. The display will show 

All contacts

 deleted 

and you will hear a confirmation tone.

View the contact memory status

1. From the home screen, press 

.  The first entry 

will be displayed. Select 

Options

 by pressing 

.

2. Press   until 

Memory

 

Status

 is displayed and 

press 

.

3. The display will show the total number of contacts 

stored and the total amount of contacts that can be 
stored, e.g. 

22

 

contacts,

 

(50

 

max.)

.

Summary of Contents for BT3940













































































Reviews: