BT BT1600 Quick Setup And User Manual Download Page 41

Page: 41 / 74

If you need some help, call us on

0800 218 2182*

or go to

bt.com/producthelp

Answer machine

While screening, you can
adjust the volume by pressing

on the handset or

on the base.

Each message is played back
with the day, date and time it
was received announced.

Using call screening

When the phone rings, wait for the answer machine
to take the call. When the caller begins to leave a
message, the display will show

Listen?

If you want

to talk to the caller, press

to take the call. This

will stop the recording if it’s started.

Message playback using the handset

When you receive new messages you will be
notified by a message on the handset display and
the

button on the base will flash: a fast flash

indicates new (unplayed) messages. You can also set
an audible alert, see page 40.

1. Select

Menu

Answer

Phone

is displayed, press

Play

Messages

and the number of new messages

will be displayed, press

. Your messages will

now be played, with the most recent first.

3. As each message is played, the handset will display

the number or the name if you have Caller Display
and the time and date it was received. If you have
any old (already listened to) messages these will be
played after your new messages.

Summary of Contents for BT1600











































































Search results

Summary of Contents for BT1600

Reviews:

BT BT1600, Quick Setup And User Manual, Page: 41 / 74

Search results

Summary of Contents for BT1600

Reviews: