BT BT1600 Quick Setup And User Manual Download Page 14

Page: 14 / 74

Getting to know your phone

If you need some help, call us on

0800 218 2182*

or go to

bt.com/producthelp

Handset display

Shows handset battery status.

Scrolls when the handset is charging.

Empty frame flashes when battery

needs recharging.

Missed call in the Calls list*.

Incoming call received.

Outgoing call made.

The keypad is locked.

Handset ringer is switched off.
On – alarm is set.

Flashing – alarm time has been reached.

On – answer machine on.

Off – answer machine off.

Flashing – new answer machine message.

Memory

full

shows if answer machine memory

is full.

When on, indicates that you are listening

to answer phone messages or recorded memos.

When on and flashing, it indicates that you

are recording a new outgoing message

or memo.

UnMute/Mute

Indicates when Mute is on or off.

Handset display icons

Handset name

* For full details of who has called you please make sure you have subscribed to Caller Display from your network provider.

A fee may be payable.

Find out more at bt.com/callingfeatures

Summary of Contents for BT1600











































































Search results

Summary of Contents for BT1600

Reviews:

BT BT1600, Quick Setup And User Manual, Page: 14 / 74

Search results

Summary of Contents for BT1600

Reviews: