8
6. User Manual
(1) As described in
“
5. Installation
”
, connect the power supply and connection tube.
(2) If you connect the power supply properly, You can hear a short buzzer sound.
(3) Press the Rapid Blood Circulation Switch to fill the blood vessel of Skin pad with simulated blood.
(4) The purpose of Rapid Blood Circulation Switch is to fill simulated blood into the empty Skin-pad rapidly.
(5) After you press the Timer Switch once, you can hear one buzzer sound in about two second.
Then the LED lamp turns on and blood flows for 5 minutes.
(6) When you press the Timer Switch more than once, you can hear buzzer sounds as shown in
the chart below. Then, blood will flow for several minutes as shown below.
(7) When you press the Timer Switch 7 times, you can hear three buzzer sounds. Then blood
circulation will stop.
No. of counts for
pressing timer switch
Total Operating
time(min)
Buzzer Sound
Remark
1
5
1
beep
2
10
2
beep-beep
3
15
3
beep-beep-beep
4
20
4
beep-beep-beep-beep
5
25
5
beep-beep-beep-beep-beep
6
30
6
beep-beep-beep-beep-beep-beep
7
Automatic Stop
3
beep-beep-----beep
