BT Versatility
Broadband Module/Broadband Module Plus Manual
70
Binary Address
Replacement
Sets whether the destination IP address of the incoming
packet is replaced with the associated internal IP address to
allow NAT traversal
Address Translation Type
Sets address replacement on a particular packet type.
•
Select “Apply”
Intrusion Detection
This is used to detect and block incoming attempts to attack or block traffic to the site.
•
Select “Configure Intrusion Detection … ”
The following screen is displayed
•
Enter the following parameters
Use Blacklist
Enables or disables blacklisting of an external host if the
firewall has detected an intrusion from that host. Access is
denied to that host for 10 minutes.
