15
On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073
Using the answering machine
Before using your answering machine for the
first time you need to:
set the time and date,
and switch the answering machine on
.
Your On-Air 1250 Classic comes with the
pre-recorded outgoing message (OGM)
“Hello, your call cannot be taken at the moment,
so please leave your message after the tone”.
You can use this outgoing message or record
your own.
The base stations answering machine is
shared by all handsets. There are two types of
answering machine mode:
1
Answer and record – Callers can leave you
messages.
2
Answer only – Callers will hear your
outgoing message but cannot leave any
message.
Each answering machine mode has its own
outgoing message.
The answering machine has an incoming
message capacity of approximately 6 minutes.
To set the time and date
Please see page 13
‘To set the time and date’.
To record your own outgoing
message (OGM)
Before proceeding it is necessary to
choose which answering machine
mode you will be using. (Answer only
or Answer and record). It is possible
to record a message for both modes
although only one mode can be on at
a time.
Press the
INTERCOM
button.
FOR ANSWER AND RECORD:
Press the
7
button.
Press the
8
button.
Press the
3
button.
You will hear a beep in the earpiece.
Speak your outgoing message.
Press the
3
button to stop recording.
Your outgoing message will be
automatically played back through the
handset earpiece.
Or
Important
The pre-recorded outgoing message (OGM)
will be deleted when you record your own
outgoing message (OGM).
Intercom
7
PQRS
3
DEF
3
DEF
8
TUV
