background image

BST Solutions GmbH  |  UV COMPACT FLAME DETECTOR IFC 10 

Page 6

GENERAL ASPECTS

It is recommended that the operator of the device concludes a service contract with 
BST Solutions. This guarantees that the device is regularly checked by our service staff 
and ensures that any required wearing and spare parts are available without long deli-
very periods.

When the UV tube is a consumable item, whose life is dependent on various factors 
that can affect not BST Solutions. 
Therefore accepts BST Solutions no warranty on the life of UV tubes.

This warranty does not apply to shipping damage, broken glass of the lens (photocell 
/ UV tube) or any other damage caused by unskilled handling, improper or inadequate 
maintenance setting.

NOTICE

NOTICE

NOTICE

1.6  Obligation of the operating company

The compact flame detektor may cause hazards if it is operated inappropriately or in an im-
proper condition.
The operating company is under the obligation to operate the machine in proper state only. 
The operating company has to secure hazardous areas that exist between BST devices and 
the customer‘s own equipment.

The operating company has to appoint and instruct responsible staff:
•  Only deploy trained or instructed staff.
•  Clearly set out the responsibilities of the staff with regard to operation, set-up, maintenance 

and repair.

•  Regularly check that staff are safety conscious and aware of hazards and are observing the 

operating instructions.

The warranty shall become void, for example, in the event of:
• inappropriate use
• use of impermissible equipment
• incorrect connection
• prior works that are not part of the supplied product or service
• non-use of original spares and accessories
• conversion, if this has not been approved by BST Solutions
• non-performance of specified maintenance work

Summary of Contents for Flamonitec IFC Series

























Reviews: