BP-7 WWW.BSTDJ.COM
© Copyright LOTRONIC 2012
Page 5
BELT TRANSMITTER OPERATING
FREQUENCY SETUP
To change frequency channel, press set until LCD screen display Ch001 (channel display values) or 750.000* (frequency display values) (*
varies depends on current settings). Press the up or down buttons to select a different channel frequency (channe1 ranges from 1-98 & A-F)
Then the LCD screen will flash. Press set agaln to confirm (if you don't confirm no adjustments will be made.
DISPLAY SETUP
LOCK FUNCTION
TECHNICAL SPECIFICATIONS
Frequency range :
UHF ( 740 – 765MHz )
Modulation :
FM
Frequency stability :
+/-0.005%
Dynamic
range
:
>105dB
Frequency
response
:
80Hz-15KHz
RF power :
4 – 8mW ( LOW ) / 20-30mW ( HIGH )
Batteries :
2 x 1.5V AA
WARRANTY CONDITIONS
BST equipment is covered by a 2-year warranty on parts and labour except for battery.
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
When you switch the transmitter on, the frequency , the frequency number and batteries level are
displayed on LCD display
Press SET button, DISPL is displayed on LCD
After 2 or 3 seconds, FYE 9U or CHA nnl will be displayed.
Use
▲
and
▼
buttons to select the kind of display
Select FYE 9U if you want to see frequencies
Select CHA nnl if you want to see frequency numbers
When you choose a kind of display, presse SET butonn to validate.
Press SET button, LOC SET is displayed on LCD
After 2 or 3 seconds, LOCK ON or LOCK OFF are displayed
LOCK ON means you cannot change frequency.
Use
▲
or
▼
to choose between LOCK ON and LOCK OFF.
Press SET button to validate
When the LOCK function is enable, you cannot change the frequency and LOC SET will be display at
each time you want to change frequency.
