AP-8260 BSTDJ.COM
Before you install or remove any cables, please make sure that the unit is turned off.
Don’t clean the speakers w ith chemical solvents as this may damage the paint surface.
Clean w ith a dry cloth
CONNECTIONS
Connect the w ires on the rear side of the speaker to the output of the
amplifier.
Connect the
red
speaker w ire to the output (
+
) of the amplifier, and the
black
to the output (
-
) of the amplifier.
Don’t invert the polarity (+/-). If the polarity of the speakers is inverted, the
sound w ill be unnatural and w ill not contain any basses.
Connections must be protected by waterproof method.
EXAMPLE OF 70V/100V SYSTEM CONFIGURATION
.
EXAMPLE OF
2 CHANNEL AMPLIFIER WITH 8Ω OUTPUT
SPECFICATIONS
Frequency response
：
60hz-20khz
Sensitivity (1w/1M)
:
90dB
Im pedance
:
8
Ω, 70V (40Ω), 100V (83Ω)
Pow er (RMS)
:
60W
Transformer Tapes
:
100V: 32-16-8-4-2-
1W & 8Ω
Enclosure Material
：
LLDPE
Environm ent
：
IP56
Dim ension
：
∅
365Xh409
BST equipment is covered by a 2 years w arranty on parts and labour
The follow ing rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the w arranty begins.
Only companies approved by BST are allow ed to w ork on the equipment. Warranty becomes void w hen other service technicians open the
equipment.
During w arranty period, defective equipment must be sent by pre-paid mail in the original box.
BST w ill return the goods by pre-paid mail during the first year of w arranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
© Copyright LOTRONIC 2014
Page 4
