ENGLISH
CAUTION
To prevent electric shock do not remove cover (or bottom) screws.
No user serviceable parts inside refer servicing to qualified
servicing personnel.
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure
DESCRIPTION :
FRONT PANEL :
1. CHINE
INPUT
Pressing chime switch, chime signal will be activated as a pre signal. You can adjust level.
OUTPUT SWITCH
This is for selector that send chime signal to master output. Chime signal has a priority .when chime signal is activated, signal output of
input 5~10 will be closed.
IMPORTANT NOTICE:
Priority will be given only for selected output.
2. INPUT 1 CONTROLS
Adjust level volume so as not to turn on +3CLIP LED under two~three o clock of master volume this is control for mic input level.
OUTPUT SWITCH
This is selector that send signal of input 1 to the master output.when input 1 are activated , signal of input 5~10 will be closed.
3 . INPUTS 2,3,4 CONTROLS
Adjust level volume so as not to turn on +3LED under two~three o clock of master volume this is control for MIC/LINE input closed.
OUTPUT SWITCH
This is selector that send signal of input 2,3,4 to the master output. when input 2~4 are activated , signal of input 5~10 will be closed.
MODE SWITCH
MIC HPF: It is input mic switch of 300Hz H.P.F that makes sound clearance.when you select Switch , windy sound.
MIC : This is MIC input switch Without filter line.
LINE : Line input for CD CASSETTE, TUNER.
IMPORTANT NOTICE: Selecting mode switch HPF flat power will be supplied to input XLR connector for condenser mic only.If you connect
Unbalanced dynamic microphone with them,it May be defaulted and should be moving to mode switch for noise Down.
PRIORITY 2~4
When you switch on , priority is activated and will closed input 5~10.
4. INPUTS 5,6,7,8,9 & 10 CONTROLS
These make adjustment of MIC/LINE For input 5~10. Adjust output level so as not to tune on CLIP LED under two o clock.
OUTPUT SWITCH
This is selector that send signal of input 5~10 to the master-output. When input 1~4 signal and chime signal are supplied, priority will be
activated and close output of input 5~10. This is selector that send signal of input 2,3,4 to the master output when input 2~4 are activated ,
signal of input 5~10 will be close.
MODE SWITCH
MIC HPF : It is input mic switch of 300Hz H.P.F that makes sound clearance.when you select Switch , windy sound.
MIC : This is MIC input switch Without filter line.
LINE : Line input for CD CASSETTE, TUNER.
IMPORTANT NOTICE: Selecting mode switch HPF flat power will be supplied to input XLR connector for condenser mic only.If you connect
Unbalanced dynamic microphone with them,it May be defaulted and should be Minimized level volume before moving to mode switch for
Noise Down.
