21
The permissible settings are shown in Figure 11, and the effects of
each on system gain and headroom is described in Table 2. Note that
combinations of header settings other than those shown should not be
used as they do not give a proper balanced drive.
TABLE 2 OUTPUT LEVEL SELECT HEADROOM AND GAIN
STRUCTURE
Setting
Output clip
System gain
Description
Level
/dB (Note 1)
3dBm
+3dBm
0
Mic level output. Factory default
13dBm
+13dBm
+10
MSR-604 pre Mk II compatibility
23dBu
+23dBu
+20
Line level output
(Note 1. Gain between input XLR and output XLR with channel Gain switch set to 0dB
and input pad set to MIC).
NOTE: The output levels are referred to using both dBm and dBu for
different settings. This is because the unit is capable of driving 3dBm or
13dBm into a 600
Ω
load but the 23dBu output, although capable of
driving 600
Ω
will, drop slightly in level for loads below 2k
Ω
.
Fig. 11 Output Level
Select Jumpers
Summary of Contents for MSR-600 II Series
Page 36: ...3 4 MSR 600 II Series USER NOTES...
Page 37: ...35 USER NOTES...
