BSS Audio FPC-800 User
Manual
Page 3 of 11
1 INRODUCTION
The FPC-800 is a battery powered hand held remote control unit that will control
up to sixteen TCS-804 units by a standard 3 wire audio lead or by a FM radio
wireless system. In the latter case the user is then free to roam around an
auditorium unrestricted by cables.
The FPC-800 will allow adjustment and display of delay distances on all
outputs. In addition it can call up and access all 12 memories in each of sixteen
different TCS-804 units that are suitably interconnected by their rear panel
sockets. Output gain trims and output mutes are also accessible. Any stereo
linking or relative modes selected on any TCS-804 will be automatically
transferred to the remote during the download routine. In addition, a MEASURE
facility is included which, with the aid of a built in microphone, will automatically
measure the delay time necessary for auditorium distributed loudspeaker
clusters.
Please read this manual carefully to ensure that you receive the most benefit.
2 UNPACKING
As part of BSS Audios’ system of quality control, this product is carefully
checked before packing, to ensure flawless appearance.
After unpacking the unit, please inspect for any physical damage and retain the
shipping carton and all relevant packing materials for use should the unit need
returning.
Supplied with the FPC-800 and carrying case will be four AA size batteries, and
optionally the TCS-804 FSK interface module and replacement EPROM. If any
damage has occurred, please notify your dealer immediately, so that a written
claim for damages can be initiated. See the Warranty section of this manual.
