BSR BONGO BEAT! Manual Download Page 25

BOB’S SPACE RACERS

®

                                                                                                                    BONGO BEAT

TM

 ARCADE MANUAL BSR V3.0 

25 

 

 

11. WARRANTY 

 

BOB’S SPACE RACERS INC. 

(a) 

90 DAY COIN-OPERATED GAME WARRANTY 

 

1.  INCLUDED IN THIS WARANTY Bob’s Space Racers

®

, Inc. warrants to the original purchaser only that the equipment that is the 

subject of this sale conforms to its specifications, and is free from defects under normal service for a 90 day period from the 
original date of deliver.  This warranty does not include any damages resulting from occurrences listed in paragraph 2 below.  
This warranty is not transferable under any circumstance.  Any claims under this warranty must be received in writing by Bob’s 
Space Racers

®

, Inc. within 120 days from date of delivery.  Within a reasonable time of such written notification Bob’s Space 

Racers

®

, Inc. will replace or repair any defective component of the equipment or part thereof which fails for reasons other than 

normal service, use, or wear.  Bob’s Space Racers

®

, Inc. reserves the right to request dated proof of purchase by the end user 

(original purchaser) at any time.  Light bulbs are specifically excluded from this warranty and shall be the sole responsibility of the 
purchaser.  Bob’s Space Racers

®

, Inc., within its sole discretion, makes the final determination as to whether to repair or replace 

any component and whether any such repair or replacement shall be performed where the equipment is located or at it’s home 
facility in Volusia County, Florida, or another facility of its sole choice.  Any and all freight charges for the purposes of repair or 
replacement shall be paid by the original purchaser.  All defective parts shall be returned to Bob’s Space Racers

®

, Inc. if 

requested.  Bob’s Space Racers

®

, Inc. does not warrant that the equipment will meet any original purchaser’s specific 

requirements or that the operation of the equipment will be uninterrupted.  These remedies are the original purchaser’s exclusive 
remedies for breach of warranty. 

 

2.  EXCLUDED BY THIS WARRANTY Bob’s Space Racers

®

, Inc. does not warrant (a) any product, components or parts not 

manufactured by Bob’s Space Racers

®

, Inc.; (b) damages caused by use of the equipment for purposes other than those for 

which it was designed; (c) defects caused by failure to provide a suitable installation environment for the equipment; (d) damage 
caused by unauthorized attachments, modification, or service; (e) damage caused by normal wear and tear or improper power 
supply; (f) damage caused by accident or disaster such as fires, flood, lightning, and wind; or (g) any other abuse or misuse of 
the equipment. 

 

3.  EXCLUSIVE WARRANTY.  THE FORGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR 

REMEDIES, WHETHER WRITTEN, ORAL OR IMPLIED.  THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE 
DESCRIPTION ON THE FACE HEREOF.  ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE, COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXPRESSLY DISCLAIMED AND 
EXCLUDED. 

 

4.  REMEDIES LIMITED. UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, 

SHALL BOB’S SPACE RACERS

®

, INC. BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, SPECIAL 

INCIDENTAL OR CONSEQUENTIAL ARISING OUT OF THE USE OR INABILITY TO USE THIS EQUIPMENT INCLUDING 
BUT NOT LIMITED TO ANY CLAIM FOR LOSS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE 
EQUIPMENT, OR ANY ASSOCIATED EQUIPMENT, FACILITIES OR SERVICE, DOWNTIME, THE CLAIMS OR COSTS OF 
THIRD PARTIES INCLUDING CUSTOMERS AND INJURY TO PROPERTY.  Some states do not allow limitations on how long 
an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or 
exclusion may not apply to you.  This warranty gives you specific legal rights, and you may also have other rights which vary 
from state to state. 

 

5.  NO OTHER WARRANTIES.  Unless modified in writing and signed by both parties, this agreement is understood to be the 

complete and exclusive agreement between the parties, superseding all prior agreements, oral or written, and all other 
communications between the parties relating to the subject matter of this agreement.  No employee or representative of Bob’s 
Space Racers

®

, Inc. or any other party is authorized to make any other warranty or to assume any other liability in connection 

with the sale of its equipment. 

 

6.  TIME LIMIT FOR CLAIMS.  Any claim for breach of warranty or claims under this warranty must be received in writing by Bob’s 

Space Racers

®

, Inc. within 120 days following delivery of the equipment. 

 

7.  FUTURE CHANGES. Bob’s Space Racers

®

, Inc. reserves the right to reserve, change or modify the construction and design of 

its equipment or any component part or parts thereof without incurring the obligations to make such changes or modifications in 
present equipment. 

 

8.  ALLOCATION OF RISKS.  This agreement allocates the risks of equipment failure between Bob’s Space Racers

®

, Inc. and the 

original purchaser.  This allocation is recognized by both parties and is reflected in the price of the goods.  THE PURCHASER 
ACKNOWLEDGES THAT HE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND IS BOUND BY ITS TERMS. 

 

9.  TO OBTAIN WARRANTY SERVICE.  The original purchaser must, at his/her own expense, bring or ship the equipment to an 

authorized location for service.  Additionally, the original purchaser must pay all freight, shipping or transportation charges for the 
return of the equipment from Bob’s Space Racers

®

, Inc. to the original purchaser.  Telephone or write: 

 
Bob’s Space Racers

®

, Inc. 

Summary of Contents for BONGO BEAT!



























Reviews: