Specifications & Instructions
(1) Power Output : RMS 10W
(2) AF Response : 100Hz-13KHz
(3) Battery : 3.7V x 2 nos.
(4) Battery Type: Rechargeable
Lithium Batteries
(5) Speaker : 3-inch speaker x 1
(6) Input Signal : Mic/MP3/USB/SD Card
(7) Charging Time : 7-8 hrs
(8) Usage Time : 12-15 hrs per charge
5
(1) Please use the original headset microphone for best performance. Insert headset
mic input jack (Fig. 4-4) into the mic input on the main unit (Fig. 1-2), adjust the
(2) When main unit is turned on (Fig. 1-1), green “POWER” indicator (Fig. 1-10) light
denotes main unit is powered on. Red “POWER” indicator (Fig. 1-10) light indicates
battery level is low. When charging, “RECHARGE” indicator turns red (Fig. 1-11).
“RECHARGE” indicator (Fig. 1-11) turns green when main unit is fully charged.
(3) Adjust Power/Vol Control Switch (Fig. 1-1) to set desired volume for headset mic
output.
(4) If feedback (howling) occurs, check volume (Fig. 1-1) is set at appropriate level.
gooseneck (Fig.4-2) until the microphone is approx. 2-3cm away from the lips (Fig. 5).
Functions
2.2 Control Panel Functions
2.2 Control Panel Functions
(1) Power On/Off & Volume Control Switch
(2) Mic Input
(3) DC 9V Power Input
(4) AUX IN Input
(5) MP3 ON/OFF Button
(6) MP3 Volume Control - Press &
hold to lower MP3 volume, quick
press to select previous track.
(7) MP3 Volume Control Press & hold
to increase MP3 volume, quick
press to select next track.
(8) “PLAY” or “PAUSE” button
(9) Eyelet for Belt
(10) Power LED Indicator
(11) Power Recharge Indicator
(12) MP3 LED Indicator. When reading MP3/ USB/ SD Card, the “PLAY” button will illuminate
and continue blinking. Red light indicates MP3/USB input, green light indicates SD Card
input.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(9)
Fig. 1
2
5.1 Headset Mic
5.1 Headset Mic
4. Specifications
4. Specifications
5 Instructions
.
5 Instructions
.
