TECHNICAL SPECIFICATIONS
PARAMETER
CONDITIONS
D65Z
D130Z
D250Z
GAIN
decibels of gain,
29 dB
29 dB
29 dB
SENSITIVITY
input volts (RMS) required for nominal power output
0.570 V
0.710 V
.744 V
INPUT IMPEDANCE
Individual channel inputs
Stereo bus inputs
50K Ohms
20K Ohms
50K Ohms
20K Ohms
50K Ohms
20K Ohms
IMD or THD+noise
max. at nominal power output into 4Ω, 20-20K Hz, 1 ch driven
max. at nominal power output into 4Ω, 20-20K Hz, 8 ch's driven
0.1%
1.0%
0.1%
1.0%
0.1%
1.0%
POWER BANDWIDTH
±0.1dB
20-20K Hz
20-20K Hz
20-20K Hz
NOMINAL OUTPUT
POWER
1
per ch with all 8 channels driven into 4 Ohm loads
65 Watts
2
100 Watts
3
110 Watts
4
all 8 channels nominal power output @ 1K Hz
695 Watts
1000 Watts
1100 Watts
at 1/8 nominal output power @ 1K Hz.
144 Watts
210 Watts
230 Watts
all inputs open
38 Watts
66 Watts
110 Watts
at idle ~ Standby
5
.65 Watts
.65 Watts
.65 Watts
DIMENSIONS
including rubber feet and output connectors (W
•
D
•
H)
48.26
x
40.8
x
11.02 cm
19
x
15.78
x
4.34 in
48.26
x
40.8
x
11.02 cm
19
x
15.78
x
4.34 in
48.26
x
40.8
x
11.02 cm
19
x
15.78
x
4.34 in
WEIGHT
excluding box & packing foam
13.9 Kg
(30.5 Lbs)
18.76 Kg
(41.4 Lbs)
21.08 Kg
(46.5 Lbs)
D65Z
D130Z
D250Z
8 CHANNEL POWER AMPLIFIERS
300025-3
BRYSTON LTD., 677 NEAL DRIVE, P.O. BOX 2170, PETERBOROUGH, ONTARIO CANADA K9J 7Y4
2011-04-27
1: Output Power: Nominal output power levels are limited by the amount of current the D130/D250 is allowed to
draw form a residential branch circuit. Power output from individual channels or from groups of
channels can be much higher when only some channels are driven to high power levels. Note
that each of the two zones, of 4 channels each, has its own power supply. Therefore, if two or
more channels are going to be driven harder than the others, it is wise to try to balance the power
demand across the two zones and thus the two power supplies.
2: D65:
Although the nominal output power per channel of the D65 is 65 Watts per channel with all chan-
nels driven, actual power output can reach 90 Watts even when all 8 channels are driven.
3: D130:
Although the nominal output power per channel of the D130 is 100 Watts per channel with all
channels driven, actual power output can exceed 140 Watts per channel when only 6 channels are
driven.
4: D250:
Although the nominal output power per channel of the D250 is 110 Watts per channel with all
channels driven, actual power output can exceed 150 Watts when 6 channels are driven, 230
Watts per channel when only 4 channels are driven or 290 Watts per channel when 3 channels are
driven.
5: Standby:
Unit is plugged in but power switch is deactivated.
