Bryston BUC-1 User Manual Download Page 6

Page: 6 / 8

BDA2 USB Driver Installation

MAC OS X Installation:

MAC OS 10.6.4 and above, natively supports USB Audio class 2, and no additional drivers

are required.

Windows 7 Installation:

To use the Bryston BDA2 as a USB sound device, the Windows operating system requires

additional USB drivers to be installed.

These drivers can be found on the Bryston USB key that is included in the box.

Connect the Bryston BDA2 to your computer.

Plug the Bryston USB key into a USB port on your computer.

In windows explorer, navigate to the Bryston USB key (BRYSTON_USB).

Now run the file called “setup.exe”. The following window will open:

Click the “Next >” button.

Install the Bryston USB Audio drivers in the default folder, or change the installation folder if

required. Click the “Install” button.

CONTINUED ON NEXT PAGE ►

USB AUDIO CLASS 2 DRIVER INSTALLATION

Summary of Contents for BUC-1

Page 1: ...BUC 1 DIGITAL TO DIGITAL CONVERTER ...

Page 3: ...ectrical Safety Front Panel Power Switch and LED Indicator Sample Rate LED Array Rear Panel Page 1 2 USB Input BNC Phono co ax Outputs AES EBU Output Trigger Input remote power On Off Data Plate Mains IEC power inlet Dimensions Specifications USB Driver Page 3 4 Installation of USB Audio Class 2 Driver Installation BUC 1 Digital to Digital Converter ...

Page 7: ...ay The setup wizard will copy all the necessary files and preinstall the drivers After successful installation the following window will open Click the Next button The setup wizard is finished and Windows will now install the Bryston USB audio drivers The Bryston BDA2 D A is now ready to use as a sound device in Windows ...

Page 8: ...300032_buc1_20131218 ...