Bryston BUC-1, User Manual

Page: 5 / 8

a BNC male and an Phono (RCA) female connector
labelled “CO-AX”.
AES/EBU OUTPUT:
There is one AES/EBU (Audio En-
gineering Society/European Broadcasting Union) fully
balanced input using a 3 pin XLR female connector
for a twisted pair wire connection of a digital audio
signal.
USB INPUT:
There is a single USB Audio Class 2 input
(24 bit/192KHz). New drivers may have to be in-
stalled in your computer to use this port. See pages
3 & 4 of this manual for more information.
When connecting to a PC it may be necessary to
direct the digital audio stream from your computer
through its USB port to the BUC-1. To do so, click on
your PC’s START menu then select CONTROL PANEL >
SOUNDS & AUDIO DEVICES > AUDIO and ensure that
the Bryston BUC-1 is selected
N.B.
No drivers are required for MAC OS. See page 3
for more information
REMOTE TRIGGER INPUT
:
The BUC-1 is equipped with
a remote trigger (ON/OFF) connector (a 2 conductor
mini 3.5mm phone jack) which when supplied with
12 VDC @ 50mA or greater will turn on the BUC-1.
The remote trigger operates a relay which is in paral-
lel with the pushbutton power switch (front panel)
and this even is the front panel switch is in the OFF
position (out) the unit may still be operational.
The Green LED will light the unit is switched on lo-
cally via the front panel switch or remotely via the
remote trigger. Note that the Trigger input is polarity
insensitive, i.e. it does not matter which terminal is
positive and which is netative.
DATA PLATE:
This label located on the rear panel
provides the units exact model number, serial num-
ber, electrical rating and date of manufacture. Do
not remove. The date code indicates then date of
manufacture where formated as YYWW where “YY”
is the two least significant digits of the year and WW
is the week of the year.
I
EC POWER INLET: Use only approved IEC-320 power
cords with C13 type connectors to mate with the
BDA-2’s IEC-320-C14 power inlet.
DIMENSIONS &
SPECIFICATIONS
POWER CONSUMPTION:
5.0 Watts max.
400 mWatts standby
WEIGHT:
2.05 KG (without packaging or power cord)
EXTERNAL DIMENSIONS (inches/metric):
8.3” Deep X 5.7” Wide X 2.55” High
211mm Deep X 145mm Wide X 65mm High