Eshop:
Email:
w
w
w
.e
M
A
R
eg
.c
z
14
The
mode turns the meter off automatically to extend battery life after
idling 32
minutes of no specified activities, where applicable, below:
1) Rotary switch or push button operations
2) Significant measuring readings of above8.5% of ranges
3) Nonoverrange readings for Resistance, Continuity or Diode function
4) Nonzero readings for Hz function
In other words, the meter will i ntelligently reset the
mode when it is under normal
measurements. To wake up the meter from
, press the
button
momentarily and release, or turn the rotary switch OFF and then back on. Always turn
the rotary switch to the OFF position when the meter is not in use.
Press and hold the
button while powering on the meter can disable both
and
features temporarily during the power on session
. The LCD will display
to confirm selectionbefore the
button is released.
Press and hold the
button while powering on the meter can shorten the
idling time to 5 seconds temporarily during the power on session . It is designed mainly
for productioninspection.
Press and hold the
button while powering on the meter can hold and show all
LCD segments b efore the button is released. It is designed mainly for production
inspection.
To avoid electrical shock, disconnect the meter from any circuit, remove the test leads
from the input jacks and turn OFF the meter before opening the case. Do not operate
with open case.
