COMMON TERMS AND WHERE TO FIND THEM
Control. To activate the program function,
press the PROGRAM button.
Reset Filter.......................................Pg. 20
The reset filter function turns off the
CLEAN FILTER indicator and restarts the
timer. Press the VACATION and
HOLD/END buttons simultaneously after
you’ve cleaned and replaced the system’s
air filter.
Set Time .............................................Pg. 1
This function allows you to set the proper
time, ensuring accurate heating and
cooling schedules. Press the SET
TIME/TEMP button to activate.
Temperature Sensors........................Pg. 12
Temperature sensors measure the current
indoor or outdoor temperatures which
are displayed on the Thermidistat Control.
Temperature Settings .........................Pg. 8
These settings are the temperatures
programmed into the Thermidistat Control
as part of your comfort schedule. The
actual room temperature will automatically
be displayed, but you can check the
desired temperature for the current mode
by pressing either the UP or DOWN
button.
35
