800SA/801SA: Installation, Start–Up, Operating and Service and Maintenance Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
39
PARTS REPLACEMENT INFORMATION GUIDE
CASING GROUP
Outer door and Blower door
Top filler plate
Bottom filler plate
Bottom enclosure
ELECTRICAL GROUP
Control bracket
Junction box
Limit switch(es)
Circuit board
Door switch
Transformer
Wiring harness 115v
Wiring harness 24v
BLOWER GROUP
Blower cutoff
Blower motor and Blower housing
Blower wheel
Grommet and Power choke (where used)
GAS CONTROL GROUP
Manifold
Orifice
Flame sensor
Hot surface igniter
Gas valve
Manual reset limit switches
Burner assembly and Burner support assembly
HEAT EXCHANGER GROUP
Heat exchanger cell
Cell panel
Lox NOx baffle (California models only)
INDUCER GROUP
Inducer motor and Inducer wheel
Pressure switch
Housing assembly
Vent elbow assembly
Draft safeguard switch
TO OBTAIN INFORMATION ON PARTS:
Consult your installing dealer or classified section of your local telephone directory under “Heating Equipment” or “Air
Conditioning Contractors and Systems” headings for dealer listing by brand name or contact:
BRYANT HEATING & COOLING SYSTEMS
Consumer Relations Department
P.O. Box 4952
Syracuse, New York 13221-4952
1-800-428-4326
Have available the model number, series number, and serial number located on the unit rating plate to ensure correct replacement part.
Example of Model Number
TRAINING
My Learning Center is your central location for professional residential HVAC training resources that help strengthen careers and businesses. We believe in providing
high quality learning experiences both online and in the classroom.
Access My Learning Center with your HVACpartners credentials at
Please contact us a
with questions.
MODEL
COOLING
CAPACITY
HEATING
CAPACITY
MOTOR
WIDTH
VOLTAGE
FEATURES / MINOR
SERIES
800SA
36
045
E
17
A
–A
FIRE, EXPLOSION, ELECTRICAL SHOCK AND CARBON MONOXIDE POISONING HAZARD
Failure to follow this warning could result in dangerous operation, personal injury, death or property damage.
Improper installation, adjustment, alteration, service, or maintenance can cause personal injury, property damage, or death. Consult a qualified
installer, service agency, or your local gas supplier for information or assistance. The qualified installer or service agency must use only
factory-authorized replacement parts, kits, or accessories when modifying this product.
WARNING
!
