+44 (0)1932 320064 | +44 (0)7990 113723
Filter replacement alert / instructions
When started, the air purifier will automatically calculate the
remaining usage of the filter, according to the unit’s running
conditions and the internally stored algorithm. When the filter
needs to be replaced, the light on the panel will continuously
flash to alert you. Once you’ve replaced the filter, start the unit
and press the sleep button for 3 seconds to turn the filter light
off. The time memory will now re-set itself.
Please handle filters as medical
waste and treat accordingly.
This appliance contains a UV-C emitter.
Timer Setting
When you start the air purifier, it will show the current PM 2.5
conditions on the control panel. Press the timer button and
the panel will show a string of numbers. If you select the zero,
the purifier will exit timer mode and the timer light will go
off. When you’ve chosen your timing length, wait ten seconds
and the unit will switch to that mode automatically (if no other
buttons have been pressed).
User guide
Tilt Detection
If the air purifier tilts at an angle of 90 degrees or more, it will
automatically power off. When placed back upright it will default
to stand by. Press the start button and if the machine enters the
smart mode then it is safe to use.