Changing
the filters
Please use regular PPE when
changing the filters and
dispose in clinical waste.
Disconnect the power supply
and ensure the unit is off.
Turn the bottom cover anti-
clockwise to access the filters.
Disconnect the UVC bulb wire
and draw out the filters from
the unit. Remove the carbon
filter from inside the HEPA filter
before removing the UVC bulb.
Re-connect UVC bulb to the new
HEPA filter cartridge, before
replacing the carbon filter and
then insert back into the unit.
Re-connect UVC Bulb wire then
put the cover back in place and
turn clockwise to lock. Press the
sleep button for three seconds.
5
+44 (0)1932 320064 | +44 (0)7990 113723
Filters
Pre-filter
This consists of an omnidirectional
antibacterial fibre mesh fabric capable
of capturing and filtering large particles
such as dust, hairs and skin flakes. This
prolongs the lifespan of the HEPA filter
and improves system efficiency.
ATP-HEPA antimicrobial peptide filter
High-density ATP-HEPA antimicrobial
peptide filter to remove airborne particulate
matter with a mean aerodynamic diameter
of 2.5 µm.
High-efficiency activated carbon layer
This is a large honeycomb-structured
filter which works to remove harmful
substances such as mercury and benzene.
It can subsequently reduce dental odours
in the surgery.
Please visit the DentAir
®
website to buy
high-performance combined filters.
Pre-filter and
ATP-HEPA filter
cartridge
UVC Bulb
High-efficiency
activated
Carbon filter