– (21123)
10603-5
10602-29
10602-32
10602-28
10602-20
10602-21
10603-4
10604-3 (R)
10604-2 (L)
21123
10603-37
10604-15C
10603-5
10602-34
GENERAL MAINTENANCE
1. Oil should not be used on the 10600BR Brutus Tile Cutter. Use of oil will cause eventual gumming
and sticking of the movable parts as the oil combines with dirt and ceramic tile dust.
2. Wear is normal in the chrome plated rails and can be evenly distributed by occasional rotation of
each of the two rails. For cutters with hex bolts holding the rails, loosen each hex bolt and slightly
rotate the rails. Retighten the hex bolts when finished.
3. The only part routinely needing replacement is the carbide scoring wheel. All other parts are
also available.
- 3 -
PARTS LIST
Part No.
Description
Qty.
10604-2/3
Replacement Pads
2
10603-4
Rail Bars
2
10603-5
End Bracket
2
10604-15C Guide (complete with clamp lever)
1
10602-20
Bearing Assembly
1
10602-21
Bearing Assembly Only
1
10602-28 Handle with Grip
1
10602-29
Grip
1
10602-32
Breaker Bar
1
10602-34
Holder for Ball Bearing Wheel
1
10602-36
Handle complete with holder for ball bearing
wheel, breaker bar & slide assembly with
bearings (20, 21, 28, 32, 34)
1
10603-37
15-3/4
"
Aluminum Arms
2
21123
7/8
"
Titanium Coated Tungsten Carbide Ball
Bearing Cutting Wheel
1
