background image

 

- 22 - 

 

 
 
 
 
 

Warranty 

For two years from the date of purchase YTL International will replace for the original purchaser, or 
repair  the  log  splitter.  The  warranty  will  not  apply  to  any  unit  which  was  not  assembled  correctly, 
misused, overloaded or which has been used or operated contrary to our instructions, or which has 
been repaired or altered by anyone other than an authorized representative.   
 

Warranty Exclusions 

This  warranty  does  not  cover  cosmetic  defects  such  as  paint,  decals  or  wear  items  such  as  tires.   
This warranty will not cover failures or problems due to acts of God, or events or forces beyond the 
control of the manufacturer.       

 

 

Normal Wear Exclusion 

The  log  splitter  needs  periodic  service  to  perform  well.  This  warranty  does  not  cover  repair  when 
normal use has exhausted the life of a part or the equipment as a whole. 

 
Installation, Use and Maintenance Exclusion 

This  warranty  will  not  apply  to  parts  and/or  labor  if  the  log  splitter  has  been  misused,  neglected, 
involved in an accident, abused, loaded beyond its limits, modified or assembled incorrectly.    Normal 
maintenance is not covered under this warranty. 

 
Limits of Implied Warranty and Consequential Damage Exclusion 

YTL International disclaims any obligation to cover any loss of time, use of this product, freight, or any 
incidental or consequential claim by anyone from using this log splitter. THIS WARRANTY IS IN LIEU 
OF  ALL  OTHER  WARRANTIES,  EXPRESS  OR  IMPLIED,  INCLUDING  WARRANTIES  OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR. 
 
An exchange unit will be subject to the original warranty.    The length of the warranty governing the 
exchanged unit will have the date as the purchase date of the original unit.    This warranty gives you 
certain legal rights which may change from state to state. Your state may also have other rights you 
may be entitled to that are not listed within this warranty. 

 
Contact Information 

Brute Brand Licensed by   
YTL International Inc. 
17517 Fabrica Way Suite J 
Cerritos, CA   90703 
Phone: (888) 723-6534   
Phone: (562) 404-8016 
Fax: (562) 404-8013 
Email: 

[email protected]

 

Website: 

www.brutepower.com

   

 

 

Contact Information below for Warranty and Service 

 
Brute Log Splitter Parts and Service:     
Toll Free (800) 232-7162 
 
Brute Engine Parts and Service:     
Toll Free (888) 879-3430

 

 

Limited Warranty 

Summary of Contents for YTL-014-441























Reviews: