Brush Hound FHX Series, Owner'S Manual

Page: 10 / 32

Basic Operation
ATTENTION
Review all safety information outlined in
safety section of manual before proceeding
with any operation of attachment.
Transport
a) Transporting on Power Unit
If the attachment is being transported on the
Power Unit, disengage the auxiliary hydraulic
circuit and position the attachment at a
reasonable driving height and position to
maximize Power Unit
’ s balance. Wait for the
drum to stop rotating before transport.
b) Transporting Attachment and Power Unit
If the Power Unit is being transported with the
Attachment (e.g. transporting on a trailer
between
jobsites), follow the Power Unit
manufacturer ’ s recommendations for transport
and be sure to comply with all local regulations.
Storage
a) Storage
When storing the attachment in between jobs:
1) Clean the attachment thoroughly (see “ Cleaning
Your Attachment ” section for specific cleaning
instructions).
2) Lubricate the attachment as recommended (see
“ Lubrication ” section for lubrication details).
3) Check wearable parts and replace as necessary
so you will be ready to operate when
necessary.
4) Store in a clean, dry place.
b) Storage on Power Unit
When leaving the Attachment unattended while
still attached to the Power Unit:
1) Find a suitable, flat location to leave the Power
Unit and Attachment.
2) Disengage auxiliary hydraulic circuit and lower
the Attachment all the way to the ground. Both
the front and rear of the Attachment should be
resting on the ground and positioned in such a
way that the balance of the resting Power Unit is
considered
3)
Turn off Power Unit and remove ignition key.
Wait for drum to completely stop its rotation
before leaving unattended.
7 www.brushhound.com