4
CAUTION
DO NOT immerse in water.
Keep your BEAM away from fire, heat, flammable or combustible products.
DO NOT disassemble the BEAM.
If the BEAM has been damaged, do not use it again before consulting Brunton tech
support.
If the USB charging cable, USB plug, or BEAM body is damaged. DO NOT use it.
The USB charging cable is for indoor use only.
Never short-circuit the terminal of the battery and the plug of the USB charging cable.
It may cause the battery to overheat, resulting in fire or damage of the components.
Use the micro-USB charging cable included for charging only.
Lithium batteries in the product can easily rupture, ignite, or explode when exposed
to high temperatures, or direct sunlight. The product should be stored and charged
under well ventilated environment. Short-circuiting a battery can also cause it to
ignite or explode. Never open a battery’s casing. Batteries contain safety devices
that protect the cells inside from abuse. If damaged, these can cause the battery to
ignite or explode while charging.
DO NOT charge the BEAM and charge an electronic device at the same time. This will
shorten the BEAM’s battery life.
Securely close the USB cover at the back of the BEAM so that it will not be damaged
by rain or dirt.
Safely and properly dispose of the BEAM according to your local regulations when it
comes to the end of its useful life.
The BEAM is NOT a toy. Child supervision recommended.
A long period of non-use will lower the voltage of the battery due to natural
self-discharge. If the light is kept on until the power is completely gone (i.e. over
discharge), it may shorten the battery life. It is recommend to charge BEAM at least
once per 1 month in order to keep the battery in normal stage.
DO NOT charge the BEAM for more than 8 hours.
If the BEAM does not provide the proper running time even though the battery is fully
charged, the battery may have reached the end of its useful life.
WARRANTY
Please register your Brunton LIGHTWAVE BEAM by visiting www.brunton.com/Register.
Brunton has taken every effort to ensure years of trouble-free use from your new
product. This product is guaranteed to be free of defect in material and workmanship
according to local regulatory requirements. This product is not subject to guarantee
from third-parties and is subject to change. Brunton will repair or replace with a
new equivalent, without charge for parts or labor, per Brunton’s discretion. Brunton
cannot beheld responsible for accidents, damages or injury occasioned by the use of
this product. Warranty will be rendered invalid if product is damaged by tampering,
negligence or misuse.
BR-Manual-Beam 7.0.indd 4
9/10/15 7:01 PM
