PAGE 4
BRUNSWICK INSTALLATION MANUAL
BLACK WOLF
BASE FRAME AND LEG ASSEMBLY
(CONTINUED)
FIGURE THREE
Step #5:
Position the two leg assemblies approximately
the length of the base frame.
Step #7:
Carefully lower the base frame over the legs.
FIGURE THREE
FIGURE FOUR
Step #8:
Align the clearance holes in the leg posts with
the clearance holes in the side sills and attach securely
with 5/16-18 x 3” hex head cap screws, hex nuts and
flatwashers
Step #9:
Securely tighten all base frame hardware,
making sure that all top surfaces are flush.
Step #10:
Thread a foot leveler into the bottom of each
leg foot.
Step #11:
Thread each foot leveler in completely.
S
tep #12:
With table in its permanent location, use a
precision level, to locate the highest corner of the base
frame. Level the table by adjusting the other three
levelers as required.
FIGURE FOUR
