Bruno REGAL CUB 35, Operator'S Manual

Page: 36 / 64

© 2001 BRUNO INDEPENDENT LIVING AIDS, INC.
36
CANE HOLDER
Secure the Cane Holder using the existing hardware on the
Premium Seat as shown below.
When installing a Cane Holder on a Fish On Seat align the
Cane Holder on the back of the chair as shown below it may be
mounted either on the right side or the left side. Mark the top
and bottom hole locations. Remove the seat padding and drill
(2) 17/16" holes to accommodate (2)1/4-20 x .75 Hex Head Cap
Screws, (2) 5/16 Fender Washers, (2) .563 OD X .268 ID X .048
Washers Black Zinc, and (2) 1/4" Hex Head Dome Fastener
Covers shown below. Holes will have to be made in fabric on
Seat Back for hardware.
CANE HOLDER SHOWN ON A PREMIUM SEAT
CANE HOLDER OPTION
NOTE:
THIS CANE HOLDER
ALSO FITS ON THE
DELUXE CUB SEAT
USING THE EXISTING
HOLES IN THE SEAT
BACK. TO EXPOSE
THE FRAME ON THE
BACK OF THE
DELUXE SEAT, FOLD
OVER THE LOWER
CORNER
FLAP ON THE BACK
OF THE SEAT.
CANE HOLDER SHOWN ON A FISH-ON SEAT