Bruno Sohnle RONDA 4210.B Operating Manual Download

Page: 4 / 105

uaLity

reCisiOn

Crown and casing partially (crown) screwed in place and waterproof

Improved waterproofing and increased shock resistance – these are the

requirements for a watch that is to be used day in, day out. Bruno Söhnle

watches ensure these features with their screwed in crowns. A screw

thread is used to fasten the crown tightly to the casing, and in some models

even the bottom of the casing is screwed down, rather than consisting of

a spring lid, thus making it considerably more watertight.

Watchstrap links screwed together and sturdy

Some models in the collection see the links on the watchstraps screwed

together.

Watchstraps with closing clasps

Bruno Söhnle watches are characterised by their classic design and their

high functionality. The clasps use hinges to fasten both straps together.

Putting the watch on and taking it off is far easier as the watchstrap does

not fully open. This also has the advantage of protecting the watchstrap

and thus giving it a longer lifespan.

Summary of Contents for RONDA 4210.B










































































































Search results

Summary of Contents for RONDA 4210.B

Reviews:

Related manuals for RONDA 4210.B

Brands by name

Popular brands

Bruno Sohnle RONDA 4210.B, Operating Manual

Search results

Summary of Contents for RONDA 4210.B

Reviews:

Related manuals for RONDA 4210.B

Brands by name

Popular brands