Issued:
Tested:
Revised:
Status: 300 Approved
Page 17 of 33
Ralph Moretti
Michel Benkovics
Ralph Moretti
Document number:
Index
10.07.2015
17.07.2015
20.01.2022
235.01518
CA
6.2
Cutting inserts
W (cubes), cutting disc Brunoises BR, Gaufrettes PG and Spaghetti Cutter
The so-called cutting inserts consist of at least 2 parts, while the
6.2.1
cubes “W”
consist of a cubing-grid and cube blade
The cube blades are marked on the upper surface. The cubing-grids con-
sisting of black glass-fibre compound are marked underneath on the rim.
First insert the cubing-grid with the sharp side facing up.
Figure 14:
Cubing-grid
Once the cubing-grid is inserted, place the appropriate blade onto the drive shaft. Ensure that the cube
blade correctly engages in the drive pin on the drive shaft. Rotating the blade carefully and gently in anti-
clockwise direction will make it engage in the drive pins on the drive shaft and seat it correctly, its “top
flush” with the drive shaft.
Now swivel the hopper head backwards and follows the next stops, “Slic-
ing vegetables correctly”
To remove a cutting insert W ( = cube) you first have to rotate and hold
the cube knife in anti-clockwise direction to release the bayonet catch.
You can then carefully lift out both parts together from below.
Figure 15:
Cubeknifes
WARNING!
•
The cube knifes and cubing-grids are very sharp and are now exposed.
•
Risk of cuts and skin abrasions!
ATTENTION!
•
Every cubing-grid has a matching cube knifes. Ensure that the matching parts
are inserted
.
•
Mixing differently sized cubing-grids and knifes can lead to immediate damage
and possibly to required repairs.