background image

 

 
 

EXERCISE COMPUTER 

 

BUTTON FUNCTIONS: 
MODE: 

        PRESS TO SELECT FUNCTION, AND HOLD ON FOR 5 SECONDS TO HAVE A TOTAL 

RESET. (THERE IS NO SINGLE FUNCTION RESET W/THE COMPUTER)  

FUNCTION:  
SCAN     :

     AUTOMATICALLY SCAN THROUGH EACH FUNCTION W/A PERIOD OF 6 SECONDS .  

TIME    :

     ACCUMULATES TOTAL WORKING TIME UP TO 99:59 

SPEED   : 

    ACCUMULATES THE CURRENT SPEED UP TO 999.9KM/H OR ML/H. THE VALUE WILL 

STAY ON THE MONITOR CONSTANTLY. 

 

DISTANCE:

     ACCUMULATES TOTAL WORKING DISTANCE UP TO 99.99KM OR ML FROM ZERO. 

CALORIE:

      ACCUMULATES CALORIE CONSUMPTION DURING EXERCISE MAXIMUM VALUE IS 

999.9 CAL. 

PULSE  :

       THE MONITOR WILL DISPLAY THE USER'S HEART RATE WHILE EXERICING. 

(If applicable) 
NOTE : 

1.    WHEN  STOP  EXERCISING,  THERE  WILL  BE  A  STOP  SIGN  SHOWN  ON  THE      UPPER-LEFT 

CORNER. 

2.  WITHOUT  ANY  SIGNAL  FOR  A  PERIOD  OF  4  MINUTES,  THE  DISPLAY  WILL      SHUT  OFF 

AUTOMATICALLY WITH ALL FUNCTION VALUES STORED. 

3. 

TURN ON THE MONITOR BY PRESSING THE BUTTON OR PEDALLING. 

4.  IF  IMPROPER  DISPLAY  ON  MONITOR,  PLS  RE-INSTALL  THE  BATTERIES  TO  HAVE  GOOD 

RESULT. 

5.  BATTERY SPEC: 1.5V UM-3 OR AA  

TROUBLE SHOOTING. 

1.  Change  the  battery.  To  change  the  computer  battery,  please  slide  the  computer  from  the  computer 

holder,  remove  the  battery  cover  on  the  back  of  the  computer  console,  and  remove  the  batteries. 
Replace with 2 x AA batteries.    Finally put the cover back on the console, and slide the computer 
back on the computer holder. 

2.  Computer not working correctly. If your computer is not working correctly, please check whether the 

lower  sensor  wire  is  connected  to  the  upper  sensor  wire,  and  make  sure  the  upper  sensor  wire  is 
plugged into the computer.   When you have checked the above, and the computer still not working, 
then please make sure the batteries are installed correctly in the computer and that the batteries are 
still working. 

3.  No resistance. If there is no tension resistance on the bike, please make sure the upper tension cable 

is connected to the lower tension cable. 

MAINTENANCE 

1. 

Before using the bike, always make sure all bolts/nuts are fully tightened. 

2. 

A spent battery is hazardous waste, please dispose of it correctly, and do not throw it in the trash. 

1. 

When  eventually  you  want  to  scrap  the  machine,  you  should  remove  the  batteries  from  the 
  computer,and dispose separately as hazardous waste.

 

 

 

Summary of Contents for TF-3.5H










Reviews: